GENERAL:
ArChine Comptek FSC 46 is custom-blended with white oil and special additives to provide excellent protection against wear and outstanding cold-temperature fluidity. It also offers excellent water separation as well as rust, corrosion, deposit and water-washout resistance to protect components. In addition, it resists fling-off and is designed to remain on the chain for maximum lubrication and protection.
ArChine Comptek FSC 46 is long life lubricant and recommended for use in screw compressors, evaporators and spiral freezers operating at extremely low temperatures including cryogenic-freezing temperatures.
ArChine Comptek FSC 46 meets USDA H-1 requirements for incidental food contact and complies with requirements for FDA 21 CFR 178.3570.
ATTRIBUTES
Excellent film strength and anti-wear properties
Resists fling-off and remains on the chain for maximum lubrication and protection
High stability and demulsibility in wet environments
Excellent rust, corrosion and deposit resistance
Non-toxic/non-hazardous
Applications
The following types of compressor applications have shown excellent performance with the ArChine Comptek FSC 46 oil:
Primarily recommended for rotary screw and vane air compressor
Very effective in screw type compressors with oil injection cooling
Units operating under severe conditions
Multistage units with a history of excessive oil degradation from mineral oil-based products
Compressor systems with critical gears and bearings
Compressors used in stationary and mobile applications
For spiral freezers operating at extremely low temperatures including cryogenic-freezing temperatures
TYPICAL PROPERTIES:
|
ISO Grade |
46 |
|
Appearance |
Colorless transparent liquid |
|
Density@ 20℃, g/cm3 |
0.859 |
|
Viscosity @ 40℃, mm2/s |
48.3 |
|
Viscosity @ 100℃, mm2/s |
6.90 |
|
Viscosity Index |
100 |
|
Pour Point, ℃ |
232 |
|
Flash Point, °C（open cup） |
-18 |
Foaming 24℃,
93.5℃,
after24℃ |
30/0
10/0
20/0 |
|
Copper corrosion,100℃/3hr, grade |
1b |
|
Online1
Online1